Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10
Par un écrivain mystérieux
Last updated 09 juillet 2024
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://zevcentric.com/cdn/shop/files/model-3-performance-model-y-oversized-front-rotor-upgrade__31956.1685777474_2048x.jpg?v=1690384531)
Paragon 2-piece Rotors (Front Pair) for Tesla Model 3 AWD Performance / Model Y - oversize rotor Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air throug
Paragon 2-piece Rotors (Front Pair) for Tesla Model 3 AWD Performance / Model Y - oversize rotor Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking under harsh track condition. Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads. Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass. Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.*Black hard coat and hard coat anodized hats are the same in terms of performance and durability. Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D) Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%. Great upgrade from stock pillar vane rotors Increases rear rotor diameter by 30mm / 1.18 (8.5%) Thicker 28mm rotor, vs. stock 25mm. Increases thermal capacity Floating 2-piece design Minimizing brake fade & judder during extended sessions Rotor to hat mounting system: D-Bobbin (long) - 10 bolt Each rotor assembly weighs 22 lbs (10 kg) 3.5mm thicker vs. factory hats, which push the wheels out 3.5mm and solve the wheel hub clearance issue of the OEM rotors. No need for a step hub centric ring or wheels with the step center bore Fits: - 2017+ Model 3 AWD Performance P3D (dual motor), and vehicles with Performance Upgrade Package PUP brakes - 2020+ Model Y AWD Long Range - 2020+ Model Y AWD Performance Direct replacement of: OEM 355x25mm front rotors (Tesla OEM part number 1044616-00-D) Wheel Fitment This larger rear rotor kit was designed to fit under certain 19 inch wheels. However, not all 19 wheels are compatible due to variations in wheel design. If your wheels are not listed below, please verify fitment using the fitment template. Wheel Fitment Template Download (PDF) > How to use the wheel fitment template (PDF) Test fit approved wheels: OEM Model Y Induction wheel 20x9.5 +45 OEM Model Y Uberturbine wheel 21x9.5 +40 Includes: One pair of Paragon Performance 385mm x 28mm (15.16” x 1.10”) 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install) One pair of anodized billet aluminum brackets Detailed installation manual Part # (w/ black hard anodized hat): P2R.048.385.280.24000.08.01.01.F Part # (w/ hard anodized hat): P2R.048.385.280.24000.08.01.02.F
Paragon 2-piece Rotors (Front Pair) for Tesla Model 3 AWD Performance / Model Y - oversize rotor Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking under harsh track condition. Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads. Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass. Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.*Black hard coat and hard coat anodized hats are the same in terms of performance and durability. Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D) Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%. Great upgrade from stock pillar vane rotors Increases rear rotor diameter by 30mm / 1.18 (8.5%) Thicker 28mm rotor, vs. stock 25mm. Increases thermal capacity Floating 2-piece design Minimizing brake fade & judder during extended sessions Rotor to hat mounting system: D-Bobbin (long) - 10 bolt Each rotor assembly weighs 22 lbs (10 kg) 3.5mm thicker vs. factory hats, which push the wheels out 3.5mm and solve the wheel hub clearance issue of the OEM rotors. No need for a step hub centric ring or wheels with the step center bore Fits: - 2017+ Model 3 AWD Performance P3D (dual motor), and vehicles with Performance Upgrade Package PUP brakes - 2020+ Model Y AWD Long Range - 2020+ Model Y AWD Performance Direct replacement of: OEM 355x25mm front rotors (Tesla OEM part number 1044616-00-D) Wheel Fitment This larger rear rotor kit was designed to fit under certain 19 inch wheels. However, not all 19 wheels are compatible due to variations in wheel design. If your wheels are not listed below, please verify fitment using the fitment template. Wheel Fitment Template Download (PDF) > How to use the wheel fitment template (PDF) Test fit approved wheels: OEM Model Y Induction wheel 20x9.5 +45 OEM Model Y Uberturbine wheel 21x9.5 +40 Includes: One pair of Paragon Performance 385mm x 28mm (15.16” x 1.10”) 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install) One pair of anodized billet aluminum brackets Detailed installation manual Part # (w/ black hard anodized hat): P2R.048.385.280.24000.08.01.01.F Part # (w/ hard anodized hat): P2R.048.385.280.24000.08.01.02.F
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://zevcentric.com/cdn/shop/files/Tesla-Model-3-Performance-2-pc-front-brake-rotors-Paragon-3__90807.1640330115_2048x.jpg?v=1685322040)
Alcon Big Brake Kit (Front Mono 6) - Tesla Model 3 / Model Y
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://zevcentric.com/cdn/shop/collections/20230201-Rally_Armor_16x9_85526dd6-b180-4549-ac3d-9285178694cf_720x.jpg?v=1679582643)
Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://cdn.shopify.com/s/files/1/0292/8276/2826/files/357662217_955111135543333_5749317908547732953_n.png?v=1688144853&width=455)
Paragon 2-piece Rotors Front Pair 400mm x 36mm (15.75 x 1.42) - Jeep
EBC C8 Corvette Stingray Z51 Front 2pc Rotors
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://cdn.shopify.com/s/files/1/0013/5708/6779/files/Civic-Type-R-FK8-Front-Big-Brake-Kit-Paragon-PA015-2__88633.1678351340_600x.jpg?v=1705302477)
Paragon 2-piece Rotors Front Pair 350mm x 32mm (13.78 x 1.26) - Hond
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://cdn11.bigcommerce.com/s-8pb2bpl705/images/stencil/400x400/products/851/3200/Tesla-Model-S-X-365x28mm-2-piece-rear-brake-rotors-Paragon-Performance-2__30221.1650430119.jpg?c=3)
Tesla Model S Brake Upgrade Parts
Paragon 2-piece Rotors (Rear Pair) for Tesla Model 3/Y Performance - oversize rotor, Paragon Performance 2-piece Rotor offers superior braking and
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://zevcentric.com/cdn/shop/files/model-3-performance-model-y-oversized-rear-rotor-upgrade__35898.1685777658_2048x.jpg?v=1690385343)
Paragon 2-piece Rotors Rear Pair 370/380x23mm - Tesla Model 3/Y AWD Performance - Larger Rotor
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://cdn11.bigcommerce.com/s-8pb2bpl705/images/stencil/400x400/products/157/6277/Nissan-370Z-2-pc-Rear-Rotors-AL-Paragon-Performance-2__13173.1701336963.jpg?c=3)
Nissan 370Z (Z34) Brake Upgrade Parts
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://drgi9xfhvf38z.cloudfront.net/misc/10bpr3701129-p04-1445x1122-lz1dl9rpffvxh94kcdch13igsu.jpg)
Front Brake Rotors (Pair)
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://unity-performance.com/cdn/shop/products/Civic-Type-R-FK8-2-pc-Rotors-Paragon_Performance-3__20934.1603863930.jpg?v=1671082902&width=1445)
Paragon 2-piece Slotted Front Rotors
![Paragon 2-piece Rotors Front Pair 385mm x 28mm (15.16 x 1.10](https://www.twostepperformance.com/cdn/shop/files/Paragon_FK8_Front_Rotors_Installed-3__19365.1668846984_800x.jpg?v=1684264819)
Paragon 2-piece Rotors Front Pair 350mm x 32mm (13.78 x 1.26) - Hond
Recommandé pour vous
- Model 314 Jul 2023
- Tesla Model 3/Y Couvre-étriers de frein (4 pièces) (2017-2023)14 Jul 2023
- Bomely Floor Mats Compatible with 2021 2022 2023 Tesla Model 3 Cargo Mat Trunk Mats Frunk Mat TPE Storage Mat Cargo Liners All Weather Tesla Model 314 Jul 2023
- 17-23 Tesla Model 3 Pre-Cut Rocker Panel Paint Protection Clear Film PPF14 Jul 2023
- Tesla Model 3 All-Weather 3 Piece Set14 Jul 2023
- Ggeneric Model 3 Performance Pedals for Tesla Model 3&Model Y Aluminum Brushed Stainless Steel Pedal Covers 2 Pieces, Nonslip Pedal Pad (Silver, Brake14 Jul 2023
- Auto Door Handle Wrap Decoration Stickers For Tesla Model 3 Model14 Jul 2023
- Car Seat Back Anti-kick Mat for Tesla Model 3 (2 pieces) – Carsoda14 Jul 2023
- Pièces détachées pour TESLA en ligne ▷ AUTODOC catalogue de pièces14 Jul 2023
- Model 3 Lightweight Carbon Fiber High Efficiency Trunk14 Jul 2023
Tu pourrais aussi aimer
- Demon Slayer jeu anime tapis de souris RGB grand tapis de souris LED XXL clavier d'ordinateur tapis de table-Demon [549] - Cdiscount Informatique14 Jul 2023
- ATN X-Sound: Bluetooth Shooting Ear Muffs & Hearing Protectors14 Jul 2023
- K&M 23881 ADAPTATEUR pour support écran VESA 75/100, filetage 3/8, noir14 Jul 2023
- AceMagic S1 Mini PC Honest Review14 Jul 2023
- LEGO 60374 City Le Camion D’Intervention des Pompiers & 60386 City Le Camion de Recyclage, Jouet pour Un Mode de Vie Durable, Camion-Poubelle avec 314 Jul 2023
- VASAGLE Bureau d'angle avec support d'écran, 140 x 130 x 76-91,5 cm (L x l x H), Cadre métallique, Grège et Noir LWD056B02 - Cdiscount Maison14 Jul 2023
- Iris Ohyama PCF-HE18 black au meilleur prix sur14 Jul 2023
- In Too Deep (Sum 41 song) - Wikipedia14 Jul 2023
- Brassière grossesse et allaitement sans coutures détail dentelle - nude, Vêtements de grossesse14 Jul 2023
- OCB Menthol paper tubes14 Jul 2023