XTC 3D - Brush on coating for 3D printed parts - 181g

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cur
XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.Inexpensive to Use: 1 oz covers 100+ square inches.90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.XTC-3D® does not contain VOC's, phthalates or phosphates.

Smooth-On XTC 3D Brush-On Coating - 3DJake International

3D Printing an Oil Cooler Duct With BD Engineering - Page 4 of 6 - MotoIQ

3D Print : Discoveries

XTC-3D™ Brush On 3D Print Coating

Smooth-On XTC 3D Brush-On Coating - 3DJake International

XTC-3D™ Brush-On Coating for 3D Print Models - 6.4oz (180g) – 3D Print Creativity Pty Ltd

XTC-3D™ Product Information

XTC 3D - Brush on coating for 3D printed parts - 644gm

How To Smooth PLA 3D Prints Using XTC-3D Inc Paint Video

XTC-3D - High Performance 3D Print Coating - 6.4 Ounce Unit: : Industrial & Scientific