Polymaker PolyMax PETG-ESD (Electrostatic Discharge Safe) Filament 3D

Par un écrivain mystérieux

Last updated 02 juin 2024

Polymaker PolyMax PETG-ESD (Electrostatic Discharge Safe) Filament 3D

PolyMax™ PETG-ESD offers better mechanical properties than any other regular PETG. Additionally the added carbon nanotubes makes it ESD safe.ESD: Electrostatic discharge. Printing, Drying and Annealing Settings? Printing Temperature: 250˚C - 290˚CBed Temperature: 70˚C - 80˚CPrinting Speed: 30mm/s - 50mm/sFan: 20%Direct
PolyMax™ PETG-ESD offers better mechanical properties than any other regular PETG. Additionally the added carbon nanotubes makes it ESD safe.ESD: Electrostatic discharge. Printing, Drying and Annealing Settings? Printing Temperature: 250˚C - 290˚CBed Temperature: 70˚C - 80˚CPrinting Speed: 30mm/s - 50mm/sFan: 20%Direct Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 65˚C for 6h(Only if the material has absorbed moisture) Do I need to use the cooling fan with PolyMax™ PETG? If you are looking to produce the strongest part (high layer adhesion), we recommend to switch off your part cooling fan.If you are looking for a high quality surface finish, we recommend to switch on your part cooling fan. Usually the best of both worlds is to leave the part cooling fan at 20%. 0.5kg cardboard spool:Spool Inner Hole Diameter: 55±1mmSpool Diameter: 200±1mmSpool Width: 65.6±2mmSpool Weight: 190±7g