PLM Turbo Shield Guard Screen Air Filter

Par un écrivain mystérieux

Last updated 04 juin 2024

PLM Turbo Shield Guard Screen Air Filter

PLM Turbo Shield - Guard your turbo! PLM Turbo Shield is the best value and protection for your turbo. By putting a screen clamp over the turbo inlet, it prevents large debris from entering into the turbo housing. This is the best way if you don't have room to run a cone-style filter or want to retain that clean engin

PLM Turbo Shield - Guard your turbo!

PLM Turbo Shield is the best value and protection for your turbo. By putting a screen clamp over the turbo inlet, it prevents large debris from entering into the turbo housing.

This is the best way if you don't have room to run a cone-style filter or want to retain that clean engine bay look!

True one-piece molded silicone design
Stainless steel mesh screen
High temperature rated silicone
Available in 3 or 4 inch sizes
In Mesh Screen or Hexagon Screen
Universal application
Clamp-on installation

Installation Note: Please measure the turbo inlet opening before purchase. The photo example shown here is a GT35R with a 4-inch turbo shield.

Product Note: Turbo is not included. It is for the turbo shield screen and clamp.

Maintenance Note: It is advised that you check the screen from time to time, as it is a regular air filter maintenance item. Strong suction will eventually affect the lifespan of the screen. PLM and its affiliates is not responsible for any damages to your turbo for installing this screen.

PLM Private Label Mfg. Power Driven B-Series TA header features a true 4-2-1 tri-y merge collector for more equal exhaust flows, delivering the best low to mid range horsepower as well as peak horsepower gains while utilizing an one piece design.

Suitable for Honda B-Series B16 B18 B20 engines
Stainless steel construction
One year warranty
Short tube Tri-Y header
True 2.5 (OD) collector Machined
CNC machined manifold flanges
Flange is .38 thick
18 gauge, 304 stainless steel
One piece design
Recommended for 1.6L - 2.0L engine displacements
Inspired by iconic JDM design Toda

Precision Works Front Suspension Tie Traction Bar

This is the best traction bar you can buy today for under $200!

Vehicle Fitment:

1992 -1995 Honda Civic EG, EH, EJ1 EJ2
1996 - 2000 Honda Civic EK3 EK4 EK5 EK9 EJ6 EJ7 EJ8 EJ9
1993 - 1997 Honda Del Sol
1994 - 2001 Acura Integra DC2
Does not fit 99-00 Civic Si EM1 SiR DOHC

Key Features:

Increase traction to ground
Improves handling
Easy fit and direct bolt on
Made with lightweight & high strength steel
Instructions are not included
Fits B-Series, K-Series engine swaps
Does NOT fit H-Series Swaps
Radiator brackets is now standard (free!)

Fitment Note: On the 99-00 Civic Si, the front LCAs are different so the traction bar will not bolt up. It will require welding from bracket to LCA.

PLM Private Label Mfg. Power Driven 3-way catalytic converters are made of tig welded stainless steel.

It has an integrated slip-fit design that is adjustable in length and rotational to adapt to almost any combination of header length and collector flange position, and the catalytic converter is a 200-cell high flow cat.

Available in 2.25, 2.50, 3.0 diameters
Length is 17 inches
O2 sensor bung with plug is included
Quick 15 minute install using only hand tools
Handmade & TIG welded
Comes with a 200 cell cat
EPA OBD-II compliant, 49-state legal
This catalytic converter is not to be used to defeat any emissions device.

PLM Private Label Mfg. crossbars X-Bar utilizes the C-pillar and strut points to decrease body flex during hard cornering, while adding a stylish look to your vehicle. We have maximized four critical points of the chassis to one stress point while retaining the vehicle's rear seats.

The improvement is undeniable, and you'll feel the difference instantly when installed for maximum rigidity.

Vehicle Fitment: