MIRA Safety CM-8M Full-Face Respirator
Par un écrivain mystérieux
Last updated 07 juillet 2024
![MIRA Safety CM-8M Full-Face Respirator](https://www.mirasafety.com/cdn/shop/products/CM-8M-Gas-mask-3_960x.jpg?v=1658506287)
The CM-8M is the next generation in CBRN defense full-face respirator technology, protecting your face and respiratory system from the worst threats imaginable.
The CM-8M tactical, air-purifying respirator is a next-gen CBRN mask, specially engineered to meet and exceed the strictest military requirements. Thanks to a unique new visor design, it provides unparalleled visibility combined with optics compatibility, along with a six-point mesh head harness for added stability. Like all MIRA Safety CBRN gas masks, it also provides trusted protection from a full spectrum of toxic industrial chemicals (TIC) and chemical warfare agents (CWA) including chemical, biological and nuclear threats such as radioactive dust, noxious gas, vaporized pollutants and more. Key Features of the CM-8M Full-Face Respirator: Contoured panoramic visor provides maximum field of view (92.5%) while preserving compatibility with night vision goggles, thermal optics and rifle scopes 20-year shelf life Uses widely available NATO-standard, 40-mm filter cartridges Durable bromobutyl rubber construction (meets CBRN protection standards) Tested for compatibility with a variety of high-cut helmets Hypoallergenic inner mask prevents fogging, even under hard use Tested resistance to mustard gas penetration for nearly 30 hours Fits up to 2 standard 40-mm 1/7” NATO filter cartridges (widely available with varying protection levels) Can be used with a single filter on either side to ensure proper cheek weld for left- or right-handed shooters Comes with a pre-installed hydration system and canteen Compatible with CamelBak water bladders with a Type M adapter (not included) Compatible with MIRA Safety gas mask microphone (sold separately) Compatible with MIRA Safety gas mask replacement parts kit Conforms to European quality and sustainability standards, marked with the CE symbol Meets all requirements under EN 136:1998, Class III Complies with all standards under EN 168 for impact protection, making this the perfect mask for riot control situations Carries MIRA Safety’s 1-year manufacturer warranty Manufactured in the Czech Republic Maximum Situational Awareness The CM-8M features a radically re-engineered visor that combines an unmatched field of view (over 92%), with a contoured shape that’s 100% compatible with popular Night Vision, Rifle Scopes and Thermal Optic setups. That means preserving crucial peripheral vision while ensuring functionality in even the most hostile environments. That means not just an enhanced field of view, but enhanced overall awareness—allowing you to quickly and confidently assess and engage threats as needed. CM-8M Full Face Respirator Sizing For the initial launch, the CM-8M will come in one universal size. The fit will be similar to the medium CM-7M, and the CM-6M, which also come in one universal size. We do not recommend this mask for people with smaller-than-average head shapes, nor do we recommend it for above-average head shapes. Always conduct a negative pressure test to ensure you are getting a tight seal, and conduct this test each time when donning the mask. The CM-8M has been tested with a wide variety of high-cut helmets and shown to integrate seamlessly. However, if the wearer has a small head, the mask may not fit well with a helmet. Mission-Flexible As opposed to some full-face respirators that are extremely specialized and mission-specific, the CM-8M was designed as a mission-flexible upgrade for civilians, law enforcement and military alike. Since it’s not a dedicated military mask, that means everyone can tap into the same level of protection that’s trusted by top Special Forces. MIRA Safety Strategic Support The CM-8M is part of the MIRA Safety family of masks; which means it uses the same filter cartridges, components and optional upgrades as your existing MIRA Safety masks. It’s compatible with the MIRA Safety Microphone System and Replacement Parts Kit, and it features the same basic construction as your existing MIRA Safety masks; allowing for rapid transition and upgrade to the CM-8M from existing platforms. Technical Specifications The CM-8M gas mask is made from thick bromobutyl rubber (CBRN-compliant) with a polycarbonate mask and a 6-point mesh head harness to ensure a rock-solid fit for users of all sizes. The key improvement for the new CM-8M is its uniquely-contoured polycarbonate visor, combining unparalleled field-of-view with a flat front that works perfectly with all your optics and NVG systems. We’ve also refined our existing gas mask designs, maximizing ergonomics and minimizing the overall size of the mask. The full-face respirator’s inner mask is made from a special hypoallergenic compound that prevents fogging and reduces carbon dioxide(CO2) content in the mask’s inner space, improving comfort for long hours of potential usage. The CM-8M features a central speech diaphragm that ensures at least 95% intelligibility of speech; however the gas mask microphone is strongly recommended as an upgrade for all MIRA Safety masks. MIRA Safety replacement parts are compatible with the CM-8M mask, and more new accessories will be available for the platform soon. Like all MIRA Safety masks, the CM-8M is designed for use with “NATO standard” filter cartridges (Rd 40 x 1/7” thread in accordance with the EN 148-1 standard). Selection of a suitable filter depends on the type and concentration of anticipated toxic agent. The CM-8M air-purifying mask equipped with a TIC or CWA filter is only safe for use in an environment containing at least 19.5% oxygen. The principles of filter selection and application are described in the filter user guides. The CM-8M tactical gas mask may be used in class 1 explosive environments only. The CM-8M mask meets all of the requirements for class 3 of the EN 136 standard. It’s a great choice for riot gear or as a riot control gas mask. TECHNICAL DATA WEIGHT: 540g INTELLIGIBILITY OF TALK: 95% AVAILABLE IN: 1 size MATERIAL OF THE FACEPIECE: Bromine-butyl rubber GENERAL FIELD OF VISION: min. 92.5% MATERIAL OF THE VISOR: Polycarbonate FILTER CONNECTION THREAD: Rd 40 mm x 1/7” Breathing resistance at 30l/min. air flow: INHALATION RESISTANCE: max. 30 Pa EXHALATION RESISTANCE: max. 60 Pa Storage The CM-8M air-purifying gas mask must be stored in a dark, cool and dust-free place free from sudden temperature changes. The storage room should be ventilated regularly. Temperatures may vary between 10°C and 25°C within relative humidity up to 65%. NBC gas masks must not be exposed to radiant heat or sunshine. Fuels, solvents, lubricants and other inflammable substances, including chemicals, must not be stored with masks. Moreover, there must not be any electrical machines or appliances that produce sparks or discharges during operation (ozone creation). Avoid deformation of the rubber parts of the facepiece and internal CBRN gas mask during storage.
The CM-8M tactical, air-purifying respirator is a next-gen CBRN mask, specially engineered to meet and exceed the strictest military requirements. Thanks to a unique new visor design, it provides unparalleled visibility combined with optics compatibility, along with a six-point mesh head harness for added stability. Like all MIRA Safety CBRN gas masks, it also provides trusted protection from a full spectrum of toxic industrial chemicals (TIC) and chemical warfare agents (CWA) including chemical, biological and nuclear threats such as radioactive dust, noxious gas, vaporized pollutants and more. Key Features of the CM-8M Full-Face Respirator: Contoured panoramic visor provides maximum field of view (92.5%) while preserving compatibility with night vision goggles, thermal optics and rifle scopes 20-year shelf life Uses widely available NATO-standard, 40-mm filter cartridges Durable bromobutyl rubber construction (meets CBRN protection standards) Tested for compatibility with a variety of high-cut helmets Hypoallergenic inner mask prevents fogging, even under hard use Tested resistance to mustard gas penetration for nearly 30 hours Fits up to 2 standard 40-mm 1/7” NATO filter cartridges (widely available with varying protection levels) Can be used with a single filter on either side to ensure proper cheek weld for left- or right-handed shooters Comes with a pre-installed hydration system and canteen Compatible with CamelBak water bladders with a Type M adapter (not included) Compatible with MIRA Safety gas mask microphone (sold separately) Compatible with MIRA Safety gas mask replacement parts kit Conforms to European quality and sustainability standards, marked with the CE symbol Meets all requirements under EN 136:1998, Class III Complies with all standards under EN 168 for impact protection, making this the perfect mask for riot control situations Carries MIRA Safety’s 1-year manufacturer warranty Manufactured in the Czech Republic Maximum Situational Awareness The CM-8M features a radically re-engineered visor that combines an unmatched field of view (over 92%), with a contoured shape that’s 100% compatible with popular Night Vision, Rifle Scopes and Thermal Optic setups. That means preserving crucial peripheral vision while ensuring functionality in even the most hostile environments. That means not just an enhanced field of view, but enhanced overall awareness—allowing you to quickly and confidently assess and engage threats as needed. CM-8M Full Face Respirator Sizing For the initial launch, the CM-8M will come in one universal size. The fit will be similar to the medium CM-7M, and the CM-6M, which also come in one universal size. We do not recommend this mask for people with smaller-than-average head shapes, nor do we recommend it for above-average head shapes. Always conduct a negative pressure test to ensure you are getting a tight seal, and conduct this test each time when donning the mask. The CM-8M has been tested with a wide variety of high-cut helmets and shown to integrate seamlessly. However, if the wearer has a small head, the mask may not fit well with a helmet. Mission-Flexible As opposed to some full-face respirators that are extremely specialized and mission-specific, the CM-8M was designed as a mission-flexible upgrade for civilians, law enforcement and military alike. Since it’s not a dedicated military mask, that means everyone can tap into the same level of protection that’s trusted by top Special Forces. MIRA Safety Strategic Support The CM-8M is part of the MIRA Safety family of masks; which means it uses the same filter cartridges, components and optional upgrades as your existing MIRA Safety masks. It’s compatible with the MIRA Safety Microphone System and Replacement Parts Kit, and it features the same basic construction as your existing MIRA Safety masks; allowing for rapid transition and upgrade to the CM-8M from existing platforms. Technical Specifications The CM-8M gas mask is made from thick bromobutyl rubber (CBRN-compliant) with a polycarbonate mask and a 6-point mesh head harness to ensure a rock-solid fit for users of all sizes. The key improvement for the new CM-8M is its uniquely-contoured polycarbonate visor, combining unparalleled field-of-view with a flat front that works perfectly with all your optics and NVG systems. We’ve also refined our existing gas mask designs, maximizing ergonomics and minimizing the overall size of the mask. The full-face respirator’s inner mask is made from a special hypoallergenic compound that prevents fogging and reduces carbon dioxide(CO2) content in the mask’s inner space, improving comfort for long hours of potential usage. The CM-8M features a central speech diaphragm that ensures at least 95% intelligibility of speech; however the gas mask microphone is strongly recommended as an upgrade for all MIRA Safety masks. MIRA Safety replacement parts are compatible with the CM-8M mask, and more new accessories will be available for the platform soon. Like all MIRA Safety masks, the CM-8M is designed for use with “NATO standard” filter cartridges (Rd 40 x 1/7” thread in accordance with the EN 148-1 standard). Selection of a suitable filter depends on the type and concentration of anticipated toxic agent. The CM-8M air-purifying mask equipped with a TIC or CWA filter is only safe for use in an environment containing at least 19.5% oxygen. The principles of filter selection and application are described in the filter user guides. The CM-8M tactical gas mask may be used in class 1 explosive environments only. The CM-8M mask meets all of the requirements for class 3 of the EN 136 standard. It’s a great choice for riot gear or as a riot control gas mask. TECHNICAL DATA WEIGHT: 540g INTELLIGIBILITY OF TALK: 95% AVAILABLE IN: 1 size MATERIAL OF THE FACEPIECE: Bromine-butyl rubber GENERAL FIELD OF VISION: min. 92.5% MATERIAL OF THE VISOR: Polycarbonate FILTER CONNECTION THREAD: Rd 40 mm x 1/7” Breathing resistance at 30l/min. air flow: INHALATION RESISTANCE: max. 30 Pa EXHALATION RESISTANCE: max. 60 Pa Storage The CM-8M air-purifying gas mask must be stored in a dark, cool and dust-free place free from sudden temperature changes. The storage room should be ventilated regularly. Temperatures may vary between 10°C and 25°C within relative humidity up to 65%. NBC gas masks must not be exposed to radiant heat or sunshine. Fuels, solvents, lubricants and other inflammable substances, including chemicals, must not be stored with masks. Moreover, there must not be any electrical machines or appliances that produce sparks or discharges during operation (ozone creation). Avoid deformation of the rubber parts of the facepiece and internal CBRN gas mask during storage.
![MIRA Safety CM-8M Full-Face Respirator](https://cdn11.bigcommerce.com/s-a1p81kvly8/images/stencil/1280x1280/products/506023/460665/mira-safety-cm-6m-tactical-gas-mask---includes-pre-installed-hydration-system--canteen-__85990.1703021418.jpg?c=2)
Cm-6M Tactical Gas Mask - Full Face Respirator For Cbrn Defense CM6M
![MIRA Safety CM-8M Full-Face Respirator](https://www.zoopy.com/wp-content/uploads/2022/12/mira-safety-cm-8m-full-review.jpg)
Mira Safety CM-8M Review - Full-Face Gas Mask
![MIRA Safety CM-8M Full-Face Respirator](https://cdn.shopify.com/s/files/1/0537/7916/9453/files/MIRA-Safety-Protective-CBRN-HAZMAT-Suit-Youth-Large-MIR-HAZSUITYL_1.png?v=1699506473&width=1000)
MIRA Safety CM-8M Full-Face Respirator
![MIRA Safety CM-8M Full-Face Respirator](https://i.ebayimg.com/images/g/KuUAAOSwHgpkBgcU/s-l1600.jpg)
MIRA Safety CM-8M Tactical Gas Mask - CBRN Defense - W/ Drinking System - NEW
![MIRA Safety CM-8M Full-Face Respirator](https://www.mirasafety.com/cdn/shop/products/CM-8M-Gas-mask-9.jpg?v=1666223805&width=900)
MIRA Safety CM-8M Full-Face Respirator
![MIRA Safety CM-8M Full-Face Respirator](https://external-preview.redd.it/7pvFLgSKpMjZv5Bcfv9QJgLYjW-icSVxV1MSGZsiw08.jpg?format=pjpg&auto=webp&s=d54e7029e9c2acc44560c6954528d0676f81aa4d)
Will the Mira CM-8M be any good? I've got one. Here's my thoughts. : r/QualityTacticalGear
![MIRA Safety CM-8M Full-Face Respirator](https://images-na.ssl-images-amazon.com/images/I/51+dyhdwQFL._SLDPMOBCAROUSELAUTOCROP288221_MCnd_AC_SR462,693_.jpg)
MIRA SAFETY CM-8M Full-Face CBRN Gas Mask W/ Canteen - Reusable Survival Nuclear Chemical Respirator for Prepper Gear and Supplies - Best Particulate Protection for Disaster, Tactical, & General Use: : Tools
![MIRA Safety CM-8M Full-Face Respirator](https://cdn.stamped.io/uploads/photos/72271_6775775461427_e8b63dac_c411_4aa2_9e77_f52ea3bb05e9.jpg?v=)
MIRA Safety CM-8M Full-Face Respirator
![MIRA Safety CM-8M Full-Face Respirator](https://image.primaryarms.com/production/SSP%20Applications/NetSuite%20Inc.%20-%20SCA%20Mont%20Blanc/Development/img/CM-8M_02.jpg?resizeid=2&resizeh=0&resizew=555)
MIRA Safety CM-8M Full Face Respirator Gas Mask
![MIRA Safety CM-8M Full-Face Respirator](https://i.ytimg.com/vi/RtQyejro7Xo/maxresdefault.jpg)
MIRA Safety CM-8M (First Impressions)!
![MIRA Safety CM-8M Full-Face Respirator](https://www.bodyarmoroutlet.com/cdn/shop/files/MS-CM8M_interior.jpg?v=1684771183)
Mira Safety CM-8M Full-Face Respirator - COMING SOON
![MIRA Safety CM-8M Full-Face Respirator](https://thepreppercompany.com/cdn/shop/files/Screenshot2023-06-29at3.25.55PM.png?v=1688073973&width=1214)
MIRA SAFETY PROFILM VISOR PROTECTORS FOR CM-6M GAS MASKS – The Prepper Company
![MIRA Safety CM-8M Full-Face Respirator](https://www.mirasafety.com/cdn/shop/products/profilm-gas-mask-visor-protectors11_grande.jpg?v=1621021271)
MIRA Safety PROFILM Visor Protectors for CM-6M Gas Masks
MIRA Safety - *CM-8M UPDATE* Few things, Originally we wanted an 8/8 release date, but due to Covid and problems with production, that isn't happening. This isn't to say there's anything wrong
Recommandé pour vous
- SIMPLEX - Black Diamond civilian Gas Mask - Impertech Safety14 Jul 2023
- Steampunk Mask Respirator Full Gas Mask Metallic Bronze Spike Costume Cosplay Fully Adjustable Straps14 Jul 2023
- Army Navy Surplus - Tactical, Big variety - Cheap prices14 Jul 2023
- Plague Doctor – Gas Mask14 Jul 2023
- Russian NVA Gas Mask With Filter14 Jul 2023
- AMZYXUAN Gas Masks Survival Nuclear and Chemical, Gas Mask with 40mm Activated Carbon Filter, Tactical Full Face Respirator Mask for Chemicals, Gases14 Jul 2023
- 12 Best Gas Masks, Face Masks, Respirators, & Filters [Hands-On] - Pew Pew Tactical14 Jul 2023
- GAS MASK ADAPTER (DGMA)14 Jul 2023
- Romanian M74 Gas Mask – Army Navy Marine Store14 Jul 2023
- Mira Gas Masks, Rugged and Durable14 Jul 2023
Tu pourrais aussi aimer
- 10pcs, Non-assembled Garden Bird Repellent, Outdoor Stainless Steel Bird Repellent Thorn, Anti Pigeon Bird Repellent Artifact, Bird Repellent Artifact14 Jul 2023
- Remplacement du connecteur d'interface de prise du port HDMI PS5 du port HDMI de la Playstation 514 Jul 2023
- Photos. À Saint-Quirin et Niderviller : le bien-être des malades d'Alzheimer dans les espaces Snoezelen14 Jul 2023
- Soporte para Casco Soporte de Pared Moto de Madera Gancho de Metal para Chaqueta Guantes Sombreros C shamjiam Perchero para motocicleta14 Jul 2023
- Clé Pass PTT - A10 - PTT Shop14 Jul 2023
- Support D'aspirateur, Support D'aspirateur, Support De Support D'aspirateur Support Salon Pour Dortoir Maison Salle De Bain Noir14 Jul 2023
- Boîtes aux lettres PTT avec barillet agréées La Poste14 Jul 2023
- WEIKAXIMU 10 Morceaux de Serpentins à Lancer à la Main, Serpentins en Papier à Lancer pour Le Réveillon du Nouvel an, Anniversaire, Mariage, Fête14 Jul 2023
- Déshumidificateur Portable 20L pour pièce jusqu'à 30 m² Pro Breeze - 4 Modes de Fonctionnement, Evacuation Continue, Compresseur d'air, Sèchage du Linge, minuterie - Contre l'humidité, la moisissure - Déshumidificateur - Achat14 Jul 2023
- Gousses de café Senseo Cappuccino - Pack de 10 X 8 Maroc14 Jul 2023