Accueil cw5200 réfrigération industrielle

CW5200 Water Chiller Unit

Par un écrivain mystérieux

Last updated 05 juillet 2024

CW5200 Water Chiller Unit | HPC Laser
HPC Laser (Laserscript) CW5200 chiller unit suitable for water cooled CO2 laser tubes. Ideal for heavier production or in warm environment, will protect your tube and keep your beam accurate. The CW5200 unit contains refrigerator gases and actively cools the recirculating water. Filling The CW5200 has a capacity of 6 litres and should be filled to just above the cooling coils. Temperature Our chiller units are set up to maintain the water temperature at a constant 18 degrees. The temperature is likely to increase under intensive use and the chiller will alert the user with an alarm sound if the temperature exceeds 25 degrees. Flow The chiller unit has its own pump if a chiller unit is fitted the standard pump is no longer required. The chiller unit monitors the flow rate of water and it will emit a warning sound and light the red alarm bulb if the flow rate is too low, this could be caused by kinks in the water tubing or blockages in the piping, if this error occurs, check all the water pipes for kinks or tight turns and check the water quality, if the water is murky it should be replaced. Available from UK stock and delivered via courier usually within 2 to 3 working days of your order. Specifications: Power Supply: AC 220, 240V 50HZ Current: 2.4-3.1A Water Capacity: 6L Refrigerant: R134a Cooling Capacity: 5084 Btu/h Dimensions: 550mm (L) x 280mm (W) x 430mm (H) Weight: 30KG Inlet / Outlet: External Ø10mm brass connector Drain: Rp 1/2 (DN15) Not available to purchase online - please contact us to order

Recirculating water chiller CW-5200 is applicable to cool CO2 laser cutting machine.