250x122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface

No backlight is required, and the display content of the last screen can be maintained for a long time after power off Low power consumption, only

waveshare 2.13“ e-Paper Display HAT for Raspberry Pi 250x122 Black/White E-Ink Screen SPI Interface Supports Partial Refresh Rev2.1

2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI

Display E-paper E-Ink - 2.13'' 250x122px - SPI - Botland - Robotic

Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using! This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Waveshare 2.13inch E-Ink Screen Display Hat (B) for Raspberry Pi 212x104 Resolution Three-color Electronic E-Paper with Embedded Controller Communicat

250x122, 2.13inch E-Ink display HAT for Raspberry Pi - Unmanned

Waveshare E-Ink Display Hat V3.X for Raspberry Pi - 2.13inch - 250x122

2.13inch e-Paper HAT 250x122 2.13inch E-Ink Display for Raspberry

E-Ink Display HAT for Raspberry Pi 2.13inch 122x250

2.13inch E-Paper HAT (B), 250x122, Red/Black/White, SPI Interface

2.13 Inch E-Ink Display Hat for Raspberry Pi 250x122 Resolution e

Waveshare 2.13 inch e-Paper HAT 250x122 for Raspberry Pi - RobotShop

2.13 Inch E-Ink Display HAT for Raspberry Pi 250x122 - DIYElectronics

This is the latest version 2.13inch e paper display HaT,Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B,Jetson Nano Ultra low power

2.13inch E-Ink Display HAT V4 Version, 250x122 Resolution 3.3V/5V Black White Two-Color e-paper Screen Module for Raspberry Pi Zero/Zero W/Zero