Grey, Flexible TPU Filament 1.75mm 0.8kg/1.76lb –

Par un écrivain mystérieux

Last updated 12 juillet 2024

Grey, Flexible TPU Filament 1.75mm 0.8kg/1.76lb –

OVERVIEW SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. SPECIFICATION - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant- Shore Hardness: 95A- Weight: 1 KG (approximately 2.20 lb) Spool Weight Total, Net Weight 0.8 KG- Diameter: 1.75mm (+/- 0.05mm)- Recommended extruder temperature:195 - 230°C- Recommended platform temperature: 40 - 60°C PRINTING TIPS Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.With bowden extruder you might pay more attention to these tips:- Print slow 15-30 mm/s Printing speed- First layer settings. (Height 100% Width 150% speed 50% e.g.)- Retraction disabled. This would reduce messy, stringing or oozing printing
Specially formulated plastic with increased amount of flexibility, with rigid structure. Resistant to oil, grease and abrasions. Recommended for printing objects, which will be impacted more than normal ones. It has many applications including; automot